How To Fill Lost Vape Ursa Nano Pod

If you’re using the Lost Vape Ursa Nano, filling the pod correctly is key to getting the best flavour and avoiding leaks. The process is simple once you know where to look.

Step-by-Step: How to Fill Ursa Nano Pods

1. Remove the pod from your Ursa Nano device.
2. Locate the rubber fill plug on the side of the pod.
3. Open the plug carefully.
4. Insert your e-liquid nozzle.
5. Fill slowly to avoid overfilling.
6. Close the plug firmly.
7. Reinsert the pod into the device.

If the pod is brand new, let it sit for 5–10 minutes to allow the coil to fully absorb the e-liquid.

What E-Liquid Works Best?

The Ursa Nano is designed for low-power vaping.

• Nicotine salts for smooth throat hit
• 50/50 e-liquids for balanced performance

Avoid thick high VG e-liquids (shortfills), as they may not wick properly.

Common Mistakes to Avoid

• Not sealing the fill plug properly
• Overfilling the pod
• Not letting the pod sit before first use
• Using the wrong e-liquid type

Avoiding these will help prevent leaks and burnt hits.

How Long Do Ursa Nano Pods Last?

Most Ursa Nano pods last around 1 to 2 weeks depending on usage.

• Light use → longer lifespan
• Heavy use → shorter lifespan
• Sweeter e-liquids → reduce lifespan

Frequently Asked Questions

Can I refill Ursa Nano pods?

Yes — they are designed to be refilled multiple times.

Why is my Ursa Nano leaking?

This is usually caused by overfilling or not sealing the rubber plug properly.

Can I use nicotine salts?

Yes — nicotine salts work best in this device.

Browse More

• Shop Ursa Nano
• Shop Ursa Pods
• Shop Nic Salts

The Bottom Line

Filling the Lost Vape Ursa Nano pod is quick and easy once you know where the fill port is. Using the right e-liquid and following proper steps will give you the best performance every time.

A Few Checks Before You Start

Use only parts made for the exact device, wash and dry your hands, and work over a clear surface so seals or small pieces do not disappear. If a pod or battery looks damaged, unusually hot or swollen, stop using it. For a fresh coil or pod, allow the e-liquid time to soak in before the first puff.

If the First Fix Does Not Work

Try one change at a time: recharge the device, reseat the pod, clean dry contact points and test a compatible replacement pod or coil. Changing everything at once makes the fault harder to identify—and creates a small pile of innocent spare parts.